KLA Corporation
KLA Corporation is a global semiconductor and electronics manufacturing technology company headquartered in Milpitas, California. The company develops process-control, inspection, metrology, yield-management, and manufacturing systems that help semiconductor companies identify defects, measure critical dimensions, improve manufacturing yields, and accelerate the production of advanced chips and electronic components. KLA technology is used across wafer manufacturing, integrated circuits, photomasks and reticles, semiconductor packaging, printed circuit boards, and IC substrates.
KLA traces its history to the semiconductor-equipment businesses KLA Instruments and Tencor Instruments, which eventually combined to form KLA-Tencor. The company later adopted the shorter KLA Corporation name. Over time, KLA expanded beyond traditional wafer inspection into optical and e-beam inspection, metrology, reticle control, advanced packaging, specialty semiconductor manufacturing, printed-circuit-board inspection, software, analytics, and long-term service support.
KLA remains an independent publicly traded technology company. Rick Wallace serves as President and Chief Executive Officer, and Bren Higgins is Executive Vice President and Chief Financial Officer. For fiscal 2026, KLA reported approximately $13.58 billion in revenue, while its workforce consisted of approximately 17,000 regular full-time employees plus about 200 part-time and temporary employees across 18 major regions.
KLA Corporation
One Technology Drive
Milpitas, CA 95035
United States
KLA’s fiscal 2026 Form 10-K identifies this address as the company’s principal executive office.
KLA’s primary corporate office is located at the same Milpitas address:
One Technology Drive, Milpitas, CA 95035
This location houses major executive, corporate, technology, administrative, and business functions.
KLA operates significant engineering, manufacturing, customer-support, and research locations around the world, including facilities in the United States, Europe, Israel, Singapore, China, Taiwan, Korea, Japan, and other major semiconductor markets.Its Ann Arbor, Michigan campus has also become an important growth and engineering center for next-generation products and technical talent.
No current official filing indicates that KLA has moved its principal headquarters away from One Technology Drive, Milpitas, California. Older addresses should therefore not replace the Milpitas headquarters unless explicitly identified as a local facility.
408-875-3000
KLA’s fiscal 2026 Form 10-K lists this as the telephone number for its principal executive office.
KLA does not publish one universal public Customer Service number covering all semiconductor, PCB, packaging, and manufacturing customers.Customers typically receive support through product-specific and regional KLA service organizations.
One Technology Drive, Milpitas, CA 95035
One Technology Drive, Milpitas, CA 95035
KLA does not publish one universal general Customer Service email.
Investor Relations: kevin.kessel@kla.com
Media: media@kla.com.
Semiconductor Equipment, Process Control, Inspection, Metrology, Electronics Manufacturing and Yield Management
KLA’s predecessor businesses date to the 1970s, with KLA Instruments founded in 1975.
Approximately
17,000 regular full-time employees
plus approximately
200 part-time and temporary employees
as of June 30, 2026.
Approximately
$13.58 billion.
Nasdaq: KLAC
Investor Relations: https://ir.kla.com/
Careers: https://www.kla.com/careers
Wafer inspection is KLA’s largest product category. These systems identify defects and process variations on semiconductor wafers during manufacturing, helping chipmakers detect problems early and improve yield before expensive downstream processing is completed.
KLA develops high-performance optical inspection tools used to identify particles, pattern defects, process anomalies, and other manufacturing issues. These systems support advanced logic, memory, power devices, mature-node semiconductors, and other chip technologies.
Electron-beam inspection systems provide high-resolution defect detection and characterization for advanced semiconductor manufacturing. They are particularly valuable when process features become too small or complex for conventional inspection methods alone.
KLA metrology equipment measures critical semiconductor dimensions, film properties, overlay, shape, and other characteristics. Accurate metrology allows manufacturers to maintain process control while shrinking device geometries and introducing new materials.
KLA provides inspection and metrology technology for optical and EUV reticles used in semiconductor lithography. These products help ensure that mask defects do not reproduce across large numbers of wafers.
KLA’s patterning technologies support lithography, etch, deposition, and related semiconductor processes. The company reported approximately $2.71 billion in fiscal 2026 revenue from its Patterning product category.
KLA provides inspection, metrology, process-control, and manufacturing technologies for advanced semiconductor packaging. These products are increasingly important for chiplets, heterogeneous integration, high-bandwidth memory, and other next-generation packaging architectures.
KLA develops software used to collect, analyze, visualize, and act on manufacturing data. Software integrates information from inspection and metrology tools to help engineers identify yield problems and optimize semiconductor processes.
Yield-management technology helps semiconductor manufacturers connect defect data with manufacturing processes and determine which problems have the largest impact on production. These tools can reduce waste, improve process stability, and shorten ramp times.
KLA supplies process equipment used in specialty semiconductor applications and advanced manufacturing. Fiscal 2026 revenue from Specialty Semiconductor Process products was approximately $503 million.
KLA provides inspection systems for printed circuit board manufacturing. These solutions help manufacturers identify defects in complex circuitry, improve quality, and support advanced electronics production.
KLA systems inspect electronic components and related manufacturing processes to detect defects before components are assembled into larger electronic systems.
Inspection and metrology technologies support manufacturing of the advanced substrates used to connect semiconductor packages to circuit boards. These substrates are increasingly important in high-performance and advanced-packaging applications.
KLA systems support silicon wafers, silicon-on-insulator materials, sapphire, glass, silicon carbide, gallium nitride, and other advanced substrates. These tools help substrate manufacturers control surface quality and material defects.
KLA provides technologies that help semiconductor manufacturers monitor chemical purity, material quality, and manufacturing processes. These solutions help reduce contamination and maintain consistent process performance.
KLA provides installation, maintenance, repair, upgrades, calibration, parts, technical support, and long-term service for installed systems around the world. Services generated approximately $3.13 billion in fiscal 2026 revenue.
KLA application engineers help customers configure inspection and metrology systems for specific manufacturing challenges. Support can include process optimization, recipe development, defect classification, yield analysis, and production ramp assistance.
408-875-3000.
408-875-3000
408-875-3000
408-875-3000
KLA does not publish one universal customer-support number for all products and regions.Customers should use their KLA regional service contact, installed-equipment support channel, or assigned account team.
No single verified worldwide support number is publicly promoted.
No universal toll-free customer-support number is publicly listed.
KLA uses regional and product-specific sales teams rather than one universal public sales number.
No universal public Billing Department number is listed.Existing customers should use invoice information or their account-management contact.
KLA operates numerous regional offices, manufacturing facilities, and service locations. Phone numbers vary by country and facility.
No universal branch-office number applies.
Main corporate number from outside the United States
+1-408-875-3000
No universal public emergency or after-hours corporate support line is listed.Contract customers should use the service escalation process provided with their equipment or support agreement.
408-875-6627
Current Investor Relations contact
Kevin Kessel, Vice President, Investor Relations
kevin.kessel@kla.com.
KLA does not prominently list a universal media phone number.
media@kla.com.
No single public HR number is promoted.
877-373-6374
International
+1-781-575-2879
Transfer Agent: Computershare Investor Services.
Not applicable.
For an existing KLA equipment or service customer, the fastest route is usually the regional service organization, assigned field service engineer, applications engineer, account manager, or support channel provided with the system. KLA equipment is highly specialized, so the general corporate number is less effective for technical troubleshooting than the customer-specific service path established during installation or support onboarding.
Have the equipment model, serial number, manufacturing site, service agreement information, error code, affected process, severity, and previous service-ticket number ready. Semiconductor-factory issues can be production critical, so customers should identify whether the incident involves equipment downtime, process control, software, parts, calibration, or another category and follow the escalation procedures included in their service agreement.
For corporate matters, call 408-875-3000. Investors can contact 408-875-6627, while media inquiries should use media@kla.com. If a technical matter cannot be resolved through the first-level service team, request escalation to the regional service manager or appropriate product-division support leader.
KLA complaints can involve equipment performance, service response, contractual disputes, invoicing, product quality, investor matters, employment, intellectual property, supply-chain issues, or another business relationship. Keep purchase orders, equipment serial numbers, service contracts, invoices, ticket numbers, email correspondence, acceptance records, and other supporting documentation before beginning escalation.
Begin with the KLA service representative, field engineer, account manager, or support organization responsible for the equipment or contract. Provide the serial number, site, incident details, service ticket, and business impact. Ask for the complaint to be documented and retain the support-case reference for further escalation.
If the complaint involves sales, service, software, parts, billing, procurement, investor relations, or another specialized function, contact that department directly. A product or service issue should generally remain with the business unit responsible for the affected KLA system rather than being transferred immediately to corporate headquarters.
Request review by the regional service manager, sales manager, product-line manager, or another appropriate supervisor if frontline support cannot resolve the issue. Provide previous ticket numbers, agreed service levels, downtime or production impact, and the exact commercial or technical resolution required.
Submit the complaint in writing through the KLA business contact responsible for the account. Include a timeline, contract or purchase-order references, affected products, prior troubleshooting, financial impact where relevant, and the requested remedy. Written documentation is especially important in semiconductor-equipment disputes because they can involve complex performance specifications.
For unresolved corporate matters, correspondence can be directed to KLA Corporation, One Technology Drive, Milpitas, CA 95035. Include the responsible business unit, customer or supplier information, previous case numbers, and management contacts already involved.
Legal, compliance, investor, intellectual-property, cybersecurity, procurement, and contractual matters should be escalated to the corresponding specialized KLA function. Public shareholders can use Investor Relations at 408-875-6627, while transfer-agent matters should be sent to Computershare.
The appropriate regulator depends on the issue. Securities-disclosure and shareholder matters may involve the U.S. Securities and Exchange Commission. Export-control, environmental, workplace-safety, competition, or data-protection matters may involve different U.S. or international regulators depending on the facts and location.
KLA operates mainly in business-to-business markets, so ordinary consumer-protection processes may not apply to most equipment disputes. Payment, procurement, vendor, or contractual disagreements should normally follow negotiated commercial remedies, while individual employment or privacy matters may qualify for government or regulatory complaint channels.
If the dispute remains unresolved, review the purchase agreement, service contract, supply agreement, or other governing document for notice requirements, mediation, arbitration, jurisdiction, warranties, and limitation periods. Preserve all system records, service tickets, purchase documentation, written complaints, management responses, and technical evidence before beginning formal proceedings.
Ramona Tire is an automotive service company that provides a wide range of tire and…
Car-X Tire & Auto is a well-known automotive service chain in the United States, specializing…
Curo Financial Technologies Corp. is a company that provides a range of financial services, primarily…
Enova International, Inc. is a financial technology (fintech) company that provides online financial services to…
Community Choice Financial Inc. (CCFI) is a financial services company that provides a variety of…
Smile Brands Inc. is a leading provider of business support services to dental practices in…
This website uses cookies.